Vessels and distribution |
|
|
All of their vessels have a maximum working pressure of 10 bar and a design lifetime of 250,000 cycles from 0 to 10 bar. The latest generation of vessels is made using an integral polyethylene liner and a high strength outer of continuous glass filament and epoxy resin. The polyethylene liner ensures that water quality is maintained in critical applications while allowing the use of a variety of regenerants including salt, acids and caustic soda. Many vessels are WRAS listed.
|
| ||
|
Composite vessels: 2.5" top hole>
Size: 6 to 13" diameter height: up to 54" Volume: up to 103 litres Temperature: <50C Working pressure: <10 bar Up to 10 x 35" with or without base Above 10 x 35" with base Temperature: <50C |
|
Composite vessels: 4" top hole or top/bottom hole
Size: 14 to 24" diameter top hole Size: 14 to 36" diameter top/bot hol height: up to 72" Volume: 92 to 450 l (top) 1084 l (top/bot) Temperature: <50C Working pressure: <10 bar |
|
Composite vessels: Flanged
Size: 14 to 79" diameter height: up to 140" Volume: 140 to 7000 litres Temperature: <65C Working pressure: <10 bar |
|
Vinylester vessels: (hot water)
Size: 8 to 13"" diameter height: up to 54" Volume: 10 to 100 litres Temperature: <65C Working pressure: <10 bar |
|
Dome hole vessels
These vessels allow topping up/inspection of media through a dome hole without taking off the valve (eg pH correction systems) Size: 10 x 54"(61 l) and 13 x 54" (103 l) Temperature: <50C Working pressure: <10 bar |
|
Distribution systems
Distribution systems (risers/laterals) for domestic softeners through to industrial filtration/softeners) |